Dimplex BF33ST 실용적인 사용자 설명서 - 페이지 10
{카테고리_이름} Dimplex BF33ST에 대한 실용적인 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BF33ST 14 페이지. Built in fireplace
Dimplex BF33ST에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (5 페이지)
페이지 인쇄
To access the light bulb area (BF45DX)
1. Open steel curtain (remove glass doors if applicable).
2. Remove two screws on log bracket and set aside. (FIGURE 3)
3. Pull front edge of plastic ember bed or plastic grate up and forward until rear tab
releases from the ledge located at the bottom of the mirror.
(FIGURE 4)
Note: Log set fits tightly into firebox, some force
may be necessary to remove.
4. Set logset in front of firebox.
5. Disconnect the logset LED wire harness from unit. (FIGURE 5)
6. Examine the bulbs to determine which bulbs require replacement.
7. Unscrew bulbs counter clockwise.
8. Insert new bulbs.
9. Re-connect the logset LED wire harness to the unit.
10. Replace the log by inserting the rear tab of the logset under the back ledge of the
fireplace and push down on the front edge of the logset until it snaps into place.
(FIGURE 4)
11. Replace log grate using two screws previously removed.
LED wire harness
FIGURE 5
7