Toshiba Air Conditioner 운영 매뉴얼

{카테고리_이름} Toshiba Air Conditioner에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba Air Conditioner 3 페이지. Motor operation procedure

페이지 인쇄

TOSHIBA INTERNATIONAL CORPORATION

Industrial Division / Houston Motor Plant

REFERENCE USE ONLY WHEN ISSUED BY MOTOR MKTG.

Dist:

Mktg.

QC 1.

SCOPE

START UP

Fig. 1

STANDARD SERVICE

Motor Operation Procedure

Motor Lubrication

To give recommended guidelines for electric motor relubrication.

Toshiba motors are properly greased at the time of manufacture. It is recommended that

if a motor has been stored for a period of six months or more, it should be lubricated prior

to starting (See Fig. 1) using a standard hand held grease gun.

FRAME SIZE

143 ~ 256

284 ~ 405

444 and Larger

It should be noted that grease leakage around the shaft hole could indicated over-

packing. Excess grease should be purged out by operating the motor temporarily with

the relief open.

Lubrication of electric motors should be done as a part of a planned maintenance

program.

Before greasing, be sure fittings are clean and free from dirt. Always relubricate using

grease that is fresh and free from contamination.

Toshiba motors may be equipped with an automatic grease relief fitting, grease plug or

grease cover plate for the outlet.

It should be noted that it may be necessary to remove an automatic type fitting due to

hardening of grease. Motors utilizing a grease plate may require the scraping out of old

grease a minimum of once every two years.

Select the proper service condition from Fig. 2.

Select the frequency and volume from Fig. 3.

Before greasing be sure fittings are clean and free from dirt.

INDEX

SHEET NO.

ISSUED

SUPERSEDES

REVISION

WRITTEN BY

APPROVED BY

QUANTITY of PUMPS

2 to 3 strokes

4 to 5 strokes

6 to 10 strokes

MDS-O-0001

1 of 3

01/24/96

NEW

I. MARQUEZ

J. Bugbee