ECKELMANN LICANYKAB 사용 설명서 - 페이지 8
{카테고리_이름} ECKELMANN LICANYKAB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ECKELMANN LICANYKAB 12 페이지. Can bus-pc adapter
페이지 인쇄
LAN Gateway Firmware V1.1c
3.2 Commissioning
Picture 3.2-1: CAN Bus to PC Adapter
The commissioning of the CAN bus to PC adapter consists of the following 8 steps:
1. Turn off the PC.
2. Connect the RS232 plug (a) of the adapter (b) with the PC's serial interface (COM port).
3. Attach the Sub-Min-D plug (c) to the adapter (b) and screw into place.
4. Connect the COMBICON plug (d) with the CAN bus and plug into E•LDS components.
(See chapter 3.1 – Installation CAN Bus Connection).
5. Connect the power pack (e) to the adapter (b) and plug into the mains power supply.
© 2010 – ECKELMANN AG | BERLINER STRASSE 161 | 65205 WIESBADEN | FON +49(0)611 7103-0 | FAX +49(0)611 7103-133 | eckelmann.de
V1.2
03. May 2010
8/12