Epson PowerLite 1262W 빠른 설정 매뉴얼 - 페이지 3

{카테고리_이름} Epson PowerLite 1262W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 1262W 4 페이지. Powerlite 1222 and 1262w 3lcd projectors
Epson PowerLite 1262W에 대해서도 마찬가지입니다: 운영 매뉴얼 (48 페이지), 빠른 참조 매뉴얼 (4 페이지)

페이지 인쇄

1. Turn on Your Equipment

Choose Connection Mode, press

connection to a computer, tablet, or smartphone) or Advanced

(for a connection to a router or access point), then press

When you're finished, press Esc to return to the Wireless LAN menu.

If you chose the Advanced connection mode, select SSID, press

and enter your network name (SSID) in the screen that appears.

•

To select a character, use the arrow buttons on the remote control

to highlight it, then press

•

To enter a number, hold down the Num button on the remote

control and press the numeric button.

•

To switch between uppercase and lowercase letters, select CAPS

and press

•

To change the displayed symbols, select SYM1 or SYM2 and

press

When you're finished entering the SSID, select Finish and press

If you chose the Advanced connection mode, select IP settings and

press

If your network assigns addresses automatically, turn on DHCP. If not,

turn off DHCP and enter the projector's IP Address, Subnet Mask, and

Gateway Address, as needed.

To enter numbers, hold down the Num button on the remote control

and press the numeric buttons. When you're finished, press Esc to return

to the Wireless LAN menu.

To prevent the SSID and IP address from appearing on the network

standby screen, set the SSID Display and/or IP Address Display

settings to Off.

When you're finished selecting settings in the Wireless LAN menu,

press Esc.

If you are connecting the projector to a secure network, select the

Security menu and press

press Esc when you're finished.

Select Complete and press

See "Install network software" for additional instructions.

Install network software

Computer

To project over the network, download and install the EasyMP

Projection software on each computer that you will project from. To monitor

and control your projector over the network, download and install the EasyMP

Monitor software (Windows only). Click the icons on your desktop to access

the software download pages.

For instructions on installing and using your network software, click the icons

on your desktop to access the online EasyMP Network Projection Operation

Guide or EasyMP Monitor Operation Guide (requires an Internet connection).

If you don't see the software download or guide icons on your desktop,

you can install them from the projector CD or go to the Epson website, as

described in "Where to get help."

, select Quick (for a direct

again.

. Then select settings as necessary and

. Then select Yes and press

again.

Network

Mobile device

To project from an iOS

download and install the Epson iProjection™ app. Visit

www.epson.com/projectorapp (U.S.) or

www.epson.ca/projectorapp (Canada) for more information.

Troubleshooting

If you see a blank screen or the No signal message after turning on your

computer or video device, check the following:

•

Make sure the Status light on the projector is blue and not flashing, and

the A/V Mute slide is open.

•

Press the Source Search button on the projector or the remote control

to switch to the correct image source, if necessary.

•

If you're using a Windows laptop, press the function key on your

keyboard that lets you display on an external monitor. It may be labeled

CRT/LCD or have an icon such as

Fn key while pressing it (such as Fn + F7). Wait a moment for the display

to appear.

•

If you're using a Mac laptop, open System Preferences and

select Displays. Select the Display or Color LCD option if necessary,

then click the Arrange or Arrangement tab, and select the Mirror

Displays check box.

Where to get help

Manuals

For more information about using the projector, click the icons on your desktop

to access the online manuals (requires an Internet connection). If you don't

have icons for the manuals, you can install them from the projector CD or go to

the Epson website, as described below.

Telephone support services

To use the Epson

PrivateLine

is available for the duration of your warranty period. You may also speak with

a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6

to 4

, Pacific Time, Saturday.

Days and hours of support are subject to change without notice. Toll or long

distance charges may apply.

Internet support

Visit www.epson.com/support (U.S.) or www.epson.ca/support

(Canada) for solutions to common problems. You can download utilities and

documentation, get FAQs and troubleshooting advice, or e-mail Epson.

Registration

offers. You can use the CD included with your projector, or register online at

www.epson.com/webreg.

Optional accessories

For a list of optional accessories, see the online User's Guide.

You can purchase screens or other accessories from an Epson authorized

reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you

can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca

(Canadian sales).

or Android™ tablet or smartphone,

. You may have to hold down the

Support service, call (800) 637-7661. This service

to 8

, Pacific Time, Monday through Friday, and 7