Dimplex BF45ST/DX 실용적인 사용자 설명서 - 페이지 9
{카테고리_이름} Dimplex BF45ST/DX에 대한 실용적인 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BF45ST/DX 14 페이지. Built in fireplace
Dimplex BF45ST/DX에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (5 페이지)
페이지 인쇄
To access the light bulb area (BF33ST/DX, BF39ST/DX,BF45ST):
1. Open steel curtain (remove glass doors if
applicable).
2. Remove two screws on log bracket and
set aside. (FIGURE 3)
3. Pull front edge of plastic ember bed or plastic
grate up and forward until rear tab releases from
the ledge located at the bottom of the mirror.
(FIGURE 4)
Note: Log set fits tightly into firebox, some force
may be necessary to remove.
4. Examine the bulbs to determine which bulbs
require replacement.
SCREWS
5. Unscrew bulbs counter clockwise.
6. Insert new bulbs.
FIGURE 3
7. Replace the log by inserting the rear tab of the
logset under the back ledge of the fireplace and push
down on the front edge of the logset until it snaps into
place. (FIGURE 4)
8. Replace log grate using two screws previously
removed.
FIGURE 4
6