Dimplex BLF7451 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Dimplex BLF7451에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BLF7451 19 페이지.
Dimplex BLF7451에 대해서도 마찬가지입니다: 서비스 매뉴얼 (16 페이지)

페이지 인쇄

1. Operation

Fireplace Installation

materials before installation.

3. Store the fireplace in a safe,

dry and dust free location until

you are ready to install the

fireplace.

Wiring

WARNING: To reduce the risk

of fire, electric shock or injury to

persons, always use a licensed

electrician.

WARNING: Ensure that the

circuit on which the fireplace is to

be installed has the power cut off

at the service panel until installa-

tion is complete.

1. Carefully remove the electrical

cover bracket from the back of

the fireplace by removing the

three retaining screws. (Figure 2)

Wiring Diagram

SWITCH BOARD

LED STRIPS

(RGB) - MEDIA

DISPLAY / CONTROL BOARD

RELAY BOARD

LED STRIPS

(RGB) - FLAME

FLICKER MOTOR

THERMISTOR

AC/DC

ADAPTER

FLAME LED STRIPS (AMBER)

2. Leaving a minimum of 3 in.

(7.6 cm) of slack, route the

power supply through a cable

clamp (not included) and the

hole in the electrical cover

bracket.

3. Remove the two covers off of

the unit at the front to access

the wire connections. (Figure 3)

For 120V Installations

Use two conductor, non-metallic

sheath cable with ground wire

(3 wires total) for the incoming

power supply.

CAUTION: Use the appropri-

ate wire to meet local and

national electrical codes for

rated power consumption.

• Connect the L1 wire from the

BLOWER MOTOR

ELEMENTS

THERMAL

LED DRIVER

BOARDS

CUTOUT