Dimplex BLF7451-AU 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Dimplex BLF7451-AU에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BLF7451-AU 19 페이지. Prism 1.2kw wall mounted electric fire
Dimplex BLF7451-AU에 대해서도 마찬가지입니다: 사용 설명서 (19 페이지)

페이지 인쇄

1. Quick Reference Guide

Fireplace Installation

Figure 3

wall anchors.

6. Install the bottom support

bracket to the wall centered

with the wall mounting bracket,

using the appropriate mount-

ing hardware, 13 ¾" (350

mm) below the wall mounting

bracket. (Figure 2)

7. remove the center screw from

the bottom of the fireplace.

(Figure 3)

8. Hang the fireplace from the

bracket.

9. Install the removed screw

through the bottom support

bracket into the fireplace.

10. refer to Front Glass Installa-

tion section final installation

procedures.

In-wall Recessed

Installation - 100mm Deep

CAUTION: Two people may

be required for various steps

of this procedure.

1. Prepare a wall with a framed

opening of 185.7cm wide x 42

cm high (Figure 4).

NOTE: The sizing has allowed

for 6.4mm around the fireplace

insert for ease of installation. this

fireplace does not require any

additional venting.

2. Choose your method of

supplying power to the unit:

• Plug in (you may run the

power cord out of the framed

wall opening to an existing

outlet or install an outlet on

a nearby wall stud within the

wall).

• Hard wire the fireplace.

NOTE: Hard wiring can

be done by removing the plug

from the factory fitted cord and

completing the wiring according

to national and Local Elecrical

Codes.

WARNINg: Do not attempt

to wire your own new outlets or

circuits. to reduce the risk of fire,

electric shock or injury to persons,

always use a licensed electrician.