Epson PowerLite 1835 빠른 설정 - 페이지 4

{카테고리_이름} Epson PowerLite 1835에 대한 빠른 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 1835 4 페이지. Warranty statement
Epson PowerLite 1835에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지), 제품 지원 게시판 (5 페이지), 운영 매뉴얼 (50 페이지), 적합성 선언 (4 페이지), 설치 핸드북 (3 페이지), 빠른 설정 (4 페이지)

페이지 인쇄

Select Network Configuration and press Enter.

Select the Basic menu and press Enter.

Select the Projector Name setting and enter a name (up to 16 characters

long) to identify your projector over the network.

Use the displayed keyboard to enter characters. Press the arrow buttons

on the remote control to highlight the characters and press Enter to

select them.

Note: See the User's Guide on the projector CD for information on adding

passwords.

Select the Wired LAN menu and press Enter.

Choose IP Settings and press Enter.

If your network assigns addresses automatically, select IP Settings and

turn on the DHCP setting. If not, turn off the DHCP setting and enter

the projector's IP Address, Subnet Mask, and Gateway Address,

as needed.

To prevent the IP address from appearing on the network standby screen,

set the SSID Display and /or IP Address Display settings to Off.

When you are finished, select Complete and press Enter, then press

Enter again to save your settings.

Press the Menu button to exit the menu system.

See "Install network software" for additional instructions.

Install network software

Install the EasyMP

Network Projection software on each computer that will

project over the network. Use the CD labeled Epson Projector Software for

Meeting & Presentation to install the program.

For instructions on installing and using your network software, see the EasyMP

Network Projection Operation Guide on your projector CD. This guide is

installed along with your projector User's Guide.

To monitor and control your projector over the network, download and install

the EasyMP Monitor software and manual from the Epson support web site.

You can install links to the download pages from your projector CD, or go to

www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and

select your projector.

Troubleshooting

If you see a blank screen or the No signal message after turning on your

computer or video device, check the following:

•

Make sure the power light on the projector is green and not flashing,

and the A/V Mute slide is open.

•

Press the Source Search button on the projector or the remote control

to select the computer as the image source.

•

If you're using a Windows notebook, press the function key on your

keyboard that lets you display on an external monitor. It may be labeled

CRT/LCD or have an icon such as

Fn key while pressing it (such as Fn + F7).

•

On a Macintosh

, select the Mirror Displays setting in the System

Preferences Displays utility.

Where to get help

Manuals

For more information about using the projector, install the manuals from your

projector CD. View the guides by clicking the icons for them on your computer

desktop.

Telephone Support Services

To use the Epson PrivateLine

Support service, call (800) 637-7661 and enter

the PIN on the Epson PrivateLine Support card included with your projector.

This service is available 6

to 6

the duration of your warranty period. You may also speak with a projector

support specialist by dialing:

US: (562) 276-4394, 6

to 8

, Pacific Time, Monday through Friday, and

to 4

, Pacific Time, Saturday

Canada: (905) 709-3839, 6

to 8

Days and hours of support are subject to change without notice. Toll or long

distance charges may apply.

Internet Support

Visit www.epson.com/support (U.S.) or www.epson.ca/support

(Canada) for solutions to common problems. You can download utilities and

documentation, get FAQs and troubleshooting advice, or e-mail Epson.

Registration

offers. You can use the CD included with your projector or register online at

www.epson.com/webreg.

Optional accessories

For a list of optional accessories, see the User's Guide on your projector CD.

You can purchase screens, carrying cases, or other accessories from an Epson

authorized reseller. To find the nearest reseller, call 800-GO-EPSON

(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S.

sales) or www.epson.ca (Canadian sales).

Epson and EasyMP are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko

Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks

of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX

. You may have to hold down the

, Pacific Time, Monday through Friday, for

, Pacific Time, Monday through Friday

CPD-28237