Dimplex BOF4056 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Dimplex BOF4056에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BOF4056 19 페이지.
Dimplex BOF4056에 대해서도 마찬가지입니다: 서비스 매뉴얼 (12 페이지)

Installation

Figure 1

BOF4056

17.8in (451mm) 27.6in. (701mm) 10.0in. (255mm) 16.3in (413mm) 15.6in. (395mm)

BOF4068

17.8in (451mm) 32.4in. (823mm) 10.0in. (255mm) 16.3in (413mm) 20.4in. (517mm)

BOF6056

23.9in. (607mm) 27.6in. (701mm) 10.0in. (255mm) 22.4in (569mm) 15.6in. (395mm)

NOTE: If installation in a cus-

tom mantel is desired, a power

cord accessory is available (BOF-

PLUGKIT) to plug the unit directly

into a wall outlet.

2. Allow up to 4 ft. (121.9 cm)

of service cable for connect-

ing a power supply wire to the

cable clamp on fireplace when

installing before finishing wall.

CAUTION: Use two conduc-

tor, non-metallic sheath cable

with ground wire (3 wires total)

for the incoming power supply on

fireplace inserts. Use appropriate

wire to meet local and national

electrical codes for rated power.

NOTE: It is recommended that

all drywall installation and finish-

ing be completed after unit is fully

installed.

3. On the back of the unit remove

the cable clamp, by removing

the screw at the top (Figure 2).

4. Install a 3/8 in. (10 mm) or

1/2 in. (13 mm) cable connec-

tor, not included, suitable for

mounting in a 7/8 in. (22 mm)

hole, to the cable plate and