Epson PowerLite 1835 설치 핸드북 - 페이지 3
{카테고리_이름} Epson PowerLite 1835에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 1835 3 페이지. Warranty statement
Epson PowerLite 1835에 대해서도 마찬가지입니다: 빠른 설정 (4 페이지), 브로셔 및 사양 (6 페이지), 제품 지원 게시판 (5 페이지), 운영 매뉴얼 (50 페이지), 적합성 선언 (4 페이지), 빠른 설정 (4 페이지)
페이지 인쇄
Epson PowerLite 1835
Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press Play (if necessary).
3. Do one of the following:
• Press the Source Search button on the projector or remote control until you see the image from
the source you want.
• Press the button for the source you want on the remote control. If there is more than one port for
that source, press the button again to select the other source.
4. If you see a blank screen or a "No Signal" message, try the following:
• Check that the device cables are securely connected to the projector and the device.
• Make sure the projector is turned on and its lens cover is open.
• For laptop computers, make sure you have set up your laptop to output its display properly.
1
Computer port sources
2
Video and HDMI sources
3
USB port sources (computer display and external devices)
4
Network source (PowerLite 93/95/96W/905/915W/1835)
INSTALLATION HANDBOOK
Remote Control Information
3