Epson PowerLite 1880 빠른 설정
{카테고리_이름} Epson PowerLite 1880에 대한 빠른 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 1880 4 페이지. Operation guide - easymp monitor
Epson PowerLite 1880에 대해서도 마찬가지입니다: 운영 매뉴얼 (47 페이지), 사양 (6 페이지)
페이지 인쇄
PowerLite
1880
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
USB Port
Connect the square end of a USB cable to the projector's
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Windows
2000 SP4 or later: After turning on the projector, follow
®
the on-screen instructions to install the Epson USB Display software
(EMP_UDSE.EXE; only on first connection).
Note: If the software screen does not display automatically, open My
Computer or Computer, then double-click EPSON_PJ_UD.
Mac OS
X 10.5.1 or higher: After turning on the projector, the setup folder
®
for USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Monitor Port
Connect one end of a VGA cable to the projector's Computer1 or
Computer2 port, and the other end to your computer's
you are using a laptop, switch it to external display (see "Troubleshooting").
You can also connect an audio cable.
HDMI Port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Wired Network
You can connect the projector to your network using an Ethernet
See "Project over a wired network" for instructions.
*412126700*
*412126700*
VGA cable
USB cable
HDMI cable
USB TypeB
monitor port. If
®
cable.
Video Device
Connect up to 5 video devices and use the Source Search button on the
projector or remote control to switch between them.
Camera, USB Device, or Epson Document Camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector's USB TypeA (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's Slideshow feature to project images. See the online User's
Guide for details.
External Monitor and External Speakers
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the online User's Guide for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The power light on the projector turns orange.
3
Open the A/V Mute slide all the way.
RCA video cable (composite video)
S-Video cable
Audio cable
Component video to VGA cable
Audio cable
HDMI cable