Epson PowerLite 1915 운영 매뉴얼 - 페이지 26

{카테고리_이름} Epson PowerLite 1915에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 1915 47 페이지. Air filter and vent maintenance
Epson PowerLite 1915에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (4 페이지), 사용자 설명서 (1 페이지), 브로셔 및 사양 (4 페이지), 업데이트 지침 (4 페이지), 적합성 선언 (4 페이지), 부품 목록 (1 페이지), 사용자 설명서 (25 페이지), 업데이트 매뉴얼 (8 페이지), 사용자 설명서 (25 페이지), 유지 관리 매뉴얼 (3 페이지)

페이지 인쇄

Monitoring window layout

Lamp failure at power on

(Lamp 1)

High internal temperature

error

Air filter air flow sensor error

Fan error

Supply System Error

(Ballast)

Supply System Error

(Ballast 2)

Cinema filter error

Cooling system error

(Peltier element)

Other error

*1 When Temperature level display group view is set to On at Environment

setup in the Tool menu, an icon indicating the internal temperature of the

projector will be displayed on top of the projector icon. The default setting

is Off.

*2 Check the following items.

- Check that the projector's power is turned on.

- Check that the LAN cable is connected.

- Check that Standby Mode is set to Communication On (or Network On)

or Network Monitoring is set to On in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

*4 You can display Replace Lamp at any time preset at Environment setup in

the Tool menu.

• The projector information that is generated when a problem is detected is

stored until EasyMP Monitor is closed. EasyMP Monitor displays will not

be updated automatically even if the projector status returns to normal.

Click "Refresh" in the main window to update the status.

Lamp failure at power on

(Lamp 2)

Low air flow error

Internal Error

Sensor error

Supply System Error

(Ballast 1)

Auto Iris Error

Shutter error

Cooling system error

(pump)

• Detectable error information differs depending on the projector you are

using.

Selecting display items

You can select only the required items to be displayed in Detail list view.

Procedure

Select "Option" from the View menu.

The Option window will be displayed.

Select the check box of the item you want to display.

Click "OK".