Epson PowerLite 400W 운영 매뉴얼 - 페이지 13

{카테고리_이름} Epson PowerLite 400W에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 400W 36 페이지. Warranty booklet
Epson PowerLite 400W에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 카탈로그 (10 페이지), 제품 사양 (2 페이지), 운영 매뉴얼 (47 페이지), 보충 설명서 (4 페이지), 빠른 설정 매뉴얼 (6 페이지), 사용자 설명서 (1 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (22 페이지), 업데이트 매뉴얼 (4 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (41 페이지), 적합성 선언 (4 페이지), 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (22 페이지)

페이지 인쇄

Registering and deleting projectors for monitoring

Registration by specifying an IP address (Manual

registration)

PROCEDURE

Right-click in "Grouping view" and select "New" -

"Projector (manual registration)".

The following window will be displayed.

• If "Detail list view" is displayed, select "New" - "Projector (manual

registration)" from the "Edit" menu.

TIP

You can also carry out this operation by selecting "Projector (manual

registration)" from "New" in the "Edit" menu.

Enter the IP address of the projector to be registered

in the "IP address" box and then click [Search]. When

the message is displayed, click [OK].

• If using a serial ⇔ TCP/IP conversion adapter and cable to connect

the projector, select "Use Serial ⇔ TCP/IP conversion adaptor".

Enter the port number in "Port Number" and then click [Search].

After searching is complete, enter the information for

the projector to be registered while referring to the

table below.

Display name Enter the name of the projector(s) to be displayed in

"Grouping view" or "Detail list view".

Up to a maximum of 32 bytes can be entered.

A space cannot be used as the first character.

Display icon

Select the icon(s) to be displayed in "Grouping view"

or "Detail list view".

Parent group

Select when registering a projector in a group.

If no groups have been created, this cannot be

selected. s"Registering several projectors to a

monitoring group all at once"

Projector

This shows the name that has been registered on the

name

projector.

IP address

This shows the IP address that you entered in step 2.

Use Serial ⇔

Select this if using a serial ⇔ TCP/IP conversion

TCP/IP

adapter to connect the projector.

conversion

adaptor.

If using a serial ⇔ TCP/IP conversion adapter to

Port Number

connect the projector, enter the port number.

p.13