Eckman EKELHT 사용 설명서 - 페이지 6

{카테고리_이름} Eckman EKELHT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Eckman EKELHT 17 페이지. 10000rpm

- 5 -

5. Service

Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

Pole hedge trimmer safety warnings:

• Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material

to be cut when blades are moving. Make sure the switch is off when clearing jammed material.

A moment of inattention while operating the hedge trimmer may result in serious personal injury.

• Carry the pole hedge trimmer by the handle with the cutter blade stopped. When transporting or storing

the pole hedge trimmer always fit the cutting device cover.

Proper handling of the pole hedge trimmer will reduce possible personal injury from the cutter blades.

• Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden

wiring or its own cord.

Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live" and could give

the operatior an electric shock.

• Keep cable away from the cutting area.

During operation the cable may be hidden in shrubs and can be accidentally cut by the blade.

Additional Safety Recommendations

Work area safety

Only use the product in the manner and for the functions described in these instructions. The operator or user is

responsible for accidents or hazards occurring to other people or their property.

Electrical safety

The British Standards Institute recommend the use of a Residual Current Device (R.C.D.) with a tripping current of

not more than 30mA. Check your R.C.D. every time you use it. Before use, examine cable for damage, replace it if

there are signs of damage or ageing.

Do not use the product if the electric cables are damaged or worn.

Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is damaged.Do not

touch the electric cable until the electrical supply has been disconnected.

Your electric cable must be untangled, tangled cables can overheat and reduce the efficiency of your product.

Always switch off at the mains before disconnecting any plug, cable connector or extension cable.

Switch off, remove plug from mains and examine electric supply cable for damage or ageing before winding cable

for storage. Do not repair a damaged cable, replace it with a new one.

Always wind cable carefully, avoiding kinking.

Use only on AC mains supply voltage shown on the product rating label.

Under no circumstances should an earth be connected to any part of the product.

Cables

Use only permitted extension cables as per HD 516. → Ask your electrical specialist.

Personal safety

Always wear suitable clothing, gloves, and stout shoes.

Thoroughly inspect the area where the product is to be used and remove all wires and other foreign objects.

All adjustments(turning the blade unit，inclining the blade head) have to be made with sheath in place，and the

Hedge Trimmer must not rest on the blade in the process.

Before using the machine and after any impact, check for signs of wear or damage and repair as necessary.