Eckman ekht36 사용 설명서 - 페이지 6

{카테고리_이름} Eckman ekht36에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Eckman ekht36 14 페이지. 36 v li-ion multi-angle

may cause burns or a fire.

e) Under abusive conditions, liquid may be ejected from the battery; avoid

contact.

If contact accidentally occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the battery may cause irritation

burns.

6) Service

a) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety instructions for batteries and chargers

Batteries

· Never attempt to open for any reason

· Do not expose to water

· Do not incinerate the battery pack even if it is severely damaged or is completely

worn out. The battery pack can explode in a fire.

· Do not store in locations where the temperature may exceed 40℃

· Do not leave the battery pack in the charger when the charging is finished,

otherwise battery leakage may occur.

· Charge only at room temperature.

· Charge only at using the charger provided with the tool (see technical data)

· Before charging , make sure that the battery is dry and clean.

· Use only the correct type of battery for the tool(see technical data).

· When dispose of batteries follow the instructions given in the section "protecting

the environment".

· Under extreme conditions ,battery leakage may occur .When you notice liquid on

the battery , proceed as follows:

· Carefully wipe the liquid off using a cloth. Avoid skin contact.

· In case of skin or eye contact, follow the instructions below.

The battery fluid, a 25-30% solution of potassium hydroxide, can be harmful. In

case of skin contact, immediately rinse with water. Neutralize with a mild acid such as

lemon juice or vinegar. In case of eye contact, rinse abundantly with clean water for at

least 10 minutes. Consult a physician.

Chargers

· Charger's plug must match the outlet. Never modify the plug in any way.

Unmodified plugs and matching outlets will reduce risk of electric shock..

· Use your charger only to charge batteries of the type supplied with your tool.

Other batteries could burst, causing personal injury and damage.

· Only 2 battery packs is allowed to be charged continuously in order to prevent

overheating of charger, necessary rest time is required to let the charger cool down

before further charging.

· When charging is finished, unplug the charger from mains socket outlet and take

away the battery pack from the charger, do not leave the battery pack in the charger.

· Never carry the charger by its cord or pull it to disconnect from the socket. Keep