Epson PowerLite 4200W 시작하기 매뉴얼

{카테고리_이름} Epson PowerLite 4200W에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 4200W 9 페이지. Multimedia projector
Epson PowerLite 4200W에 대해서도 마찬가지입니다: 운영 매뉴얼 (47 페이지), 빠른 참조 (7 페이지), 적합성 선언 (4 페이지), 브로셔 (6 페이지), 브로셔 및 사양 (6 페이지), 설치 핸드북 (8 페이지)

페이지 인쇄

Message Broadcasting

Message Broadcasting is a plug-in for EasyMP Monitor.

Administrators can use the plug-in to send messages or

announcements to one or more projectors or all the projectors on the

network. You can send messages manually, or use the Timer function

in EasyMP Monitor to have messages sent automatically.

You can use Message Broadcasting to send images in JPEG format.

The maximum resolution for an image is 1920 × 1200 pixels.

Getting Started

Before you install the Message Broadcasting plug-in, make sure

EasyMP Monitor (version 4.40 or later) is installed, and your

projectors are registered in EasyMP Monitor. Make sure your

projectors support Message Broadcasting; check

www.epson.com/support if necessary.

Follow the instructions on the Epson website for downloading and

installing.

You need to use a networked Windows computer running

Windows

7, Windows Vista

, Windows XP, or Windows 2000

Professional to install the plug-in.

If any of the projectors you select are switched off, they will power on

automatically when you begin Message Broadcasting. For network

communication, make sure the

setting in the

Standby Mode

projectors' Extended menu is set to

Communication On

Message Broadcasting