Epson PowerLite 450W 빠른 설정 매뉴얼
{카테고리_이름} Epson PowerLite 450W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 450W 4 페이지. Lamp and status information
Epson PowerLite 450W에 대해서도 마찬가지입니다: 운영 매뉴얼 (47 페이지), 사용자 설명서 (1 페이지), 브로셔 및 사양 (4 페이지), 부품 목록 (1 페이지), 사용자 설명서 (25 페이지), 설치 핸드북 (2 페이지), 교체 매뉴얼 (4 페이지), 유지 관리 매뉴얼 (2 페이지)
PowerLite
450W/460
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
Before you can connect to the projector, you need to loosen the screws and
remove the cable cover.
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector's Computer1 or Computer2 port, and
the other end to your computer's
laptop, switch it to external display. You can also connect an audio cable or
microphone.
Computer USB Port
Connect a computer using a USB cable.
Connect the square end of the USB cable to the projector's TypeB
(square) USB port. Connect the flat end of the cable to any USB port on your
computer. You can also connect an audio cable or microphone.
Follow the on-screen instructions to install the Epson USB Display software. If
you see warning messages, click OK or Continue. (Software is installed only
the first time you connect the computer.) Press the USB button on the remote
control if necessary.
*411850400*
*411850400*
monitor port. If you are using a
Network (LAN)
Connect the projector to your network using an Ethernet
over the network" for more information.
Microphone
Connect a dynamic or condenser microphone to the Mic port, using a 3.5 mm
mini-jack cable.
Video Player
Connect up to 4 video devices and use the remote control to switch between
them.
S-Video
RCA video cable
cable
(composite video)
(optional)
(optional)
Interactive Whiteboard or Document Camera
Connect an interactive whiteboard or document camera to the projector's
TypeA
(flat) USB port.
For information on playing sound through the projector or connecting an
external monitor, see the User's Guide on your projector CD.
cable. See "Project
®
Component video
Audio cable
to VGA cable
(optional)
(optional)