Eckman EKETC6 사용 설명서 - 페이지 9

{카테고리_이름} Eckman EKETC6에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Eckman EKETC6 15 페이지. With optional roller

V. Height Adjustments

1）Wheels height adjustments

The height of the machine above the ground can be adjusted by moving the height adjustment levers

to the required position. To

next to the smaller wheels and move them to their highest position.To

move the adjustment levers one at a time to their lowest position .

Adjustment

lever

Highest position

NOTE: The two height adjustment levers must be set to the same height positions.

2）Roller height adjustments

The Roller height can be adjusted by moving the height adjustment levers to the required position. This is

same as above wheels height adjustments. The only difference is roller height only has four height

grades,The function of the shorter screw is to prevent the user from setting the adjustment lever on the

fifth height grade or above. (see photos as below)

Lowest position

set

the lowest position, one at a time pull the adjustment levers located

Highest position

set

the highest cutting position,

Lowest position

Shorter screw