Epson PowerLite 485W 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} Epson PowerLite 485W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 485W 4 페이지. Maintenance
Epson PowerLite 485W에 대해서도 마찬가지입니다: 운영 매뉴얼 (50 페이지), 적합성 선언 (4 페이지), 빠른 설정 매뉴얼 (4 페이지), 사양 (6 페이지), 설치 핸드북 (4 페이지)
페이지 인쇄
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Press the Wide or Tele button to enlarge or reduce the image.
4
Raise or lower the focus lever to sharpen the image.
5
If your image looks like
projector to correct it.
6
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely. Or press the Wide or Tele
buttons on the projector to correct it.
or
, press the
or
buttons on the
or
, you've placed the projector off to
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online
User's Guide.
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11g,
802.11b, or 802.11n wireless network. You must install the optional Epson
wireless LAN module (part number V12H418P12). Your computer must have
a wireless card or built-in wireless interface, and be running Windows 7,
Windows Vista
, Windows XP Professional x64, Windows XP, or Windows 2000,
®
or Mac OS X 10.3 to 10.7.
1
Turn off the projector and unplug the power cord.
2
Unscrew and remove the cable cover if necessary.
3
Insert the wireless LAN module into the port.
Choose which
source to display
Navigate projector
menus
Get solutions to
common problems