Epson PowerLite 735c 제품 정보 - 페이지 6

{카테고리_이름} Epson PowerLite 735c에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 735c 14 페이지. Release of check tool for network projectors v1.00 for windows
Epson PowerLite 735c에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 운영 매뉴얼 (36 페이지), 사용자 설명서 (29 페이지), 사양 (2 페이지), 운영 매뉴얼 (47 페이지), 부품 목록 (1 페이지), 제품 지원 게시판 (30 페이지), 설치 매뉴얼 (19 페이지), 빠른 설정 매뉴얼 (2 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (38 페이지), 제품 지원 게시판 (12 페이지), 제품 지원 게시판 (42 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (41 페이지), 제품 지원 게시판 (34 페이지), 제품 지원 게시판 (38 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (22 페이지)

페이지 인쇄
Epson PowerLite 735c 제품 정보
EPSON PowerLite 735c Projector
You can also use the remote control to access the projector's
menu, where you can perform keystone correction or
Setting
enable the
Auto Keystone

Correcting Computer Images

If you're connected to a computer and the image doesn't
display correctly (for example, part of the screen is cut off),
press the
button on the remote control. This
Auto
automatically adjusts the picture quality and resolution so that
the image fits properly on the screen.

Shutting Down the Projector

When you've finished using the projector, follow the
recommended procedure to shut it down. This extends the life
of the lamp and protects the projector from possible
overheating.
Note: When the projector has not received any input signals for 30
minutes, it automatically turns off the projector lamp and enters
standby mode. This conserves electricity, cools the projector, and
extends the life of the lamp. If you are done using the projector,
unplug the power cord. If you want to start projecting again, press
the
button.
Power
1. If you're using a computer or laptop, shut it down first.
Otherwise you may not be able to see your computer's
display to shut it down properly.
2. To turn off the projector, press the red P
the projector or remote control. You see a confirmation
message. (If you don't want to turn it off, press any other
button.)
Power
button
3. Press the P
button again. The power light flashes
Power
orange for about 90 seconds as the projector cools down.
When the projector has cooled, the orange light stays on
and the exhaust fan shuts off.
If you want to turn the projector on again, wait until the
orange light stops flashing. Then press the P
button.
6
EPSON PowerLite 735c Projector
-
option.
button on
Power
Power
4. Turn off and disconnect any equipment plugged into the
projector.
5. Replace the lens cap, retract the feet, and unplug the power
cord.
Caution: To avoid damaging the projector or lamp, never
unplug the power cord when the power light is green or
flashing orange.
6. Store the projector in the case that came with it or in a
similar protective case.

Using the Remote Control

The remote control lets you access most of your projector's
features from anywhere in the room (up to 20 feet away). You
can use it to turn the projector on and off and zoom the
image, for example.
Page down
Comp/EasyMP
Menu
Zoom out
Arrow buttons
Auto
This table summarizes the functions on the remote control.
Button
Function
Page up
Returns to the previous image in a slideshow.
Page down
Advances to the next image in a slideshow.
Power
Turns the projector on or off.
Color Mode
Adjusts the vividness of the image color. You can
select from six settings, and save a different setting
for each computer and/or video source.
Comp/EasyMP
Switches between computer source and EasyMP.
S-Video/Video
Switches between an S-Video source and a
standard composite video source.
Freeze
Halts action. Press again to resume action.
Menu
Displays menus for changing projector settings.
2/03
Page up
Power
Page down
Page up
Comp/EasyMP
S-Video/Video Color Mode
Menu
A/V Mute
Freeze
E-Zoom
Enter
Auto
ESC
Enter
Power
S-Video/
Video source
Color mode
Freeze
A/V mute
Zoom-in
Esc