EPSON PowerLite 7800p Projector
When you finish changing an address in the network menu,
press the
button (on the remote control) or the
Enter
button (on the projector). This stores the
Auto/Enter
value.
6. When you're done making all necessary changes, press
to exit the menu system.
Opening and Closing EMP Monitor
To start EMP Monitor, click
Programs > EPSON Projector > EMP Monitor
If you've added the program to the Startup programs folder, it
may already be open. If so, click the icon in the system tray on
the lower-right corner of your screen to display the EMP
Monitor window:
To close EMP Monitor, right-click the program icon shown
above, then select
.
Exit
Registering Projectors in EMP Monitor
Before you can monitor a projector, you have to register it.
Follow these steps:
1. Open EMP Monitor. You see this screen:
Click here
2. Click
Register projector
14
EPSON PowerLite 7800p Projector
-
or
Start > Programs
All
.
Click here to start EMP Monitor
. You see this screen:
Click here
3. Click
Auto detect
on the network. Or click
the projector's name and network address.
Note: If Auto detect fails to find the projector, your projector
ESC
may not be connected or configured correctly for the network.
Any projectors found on the network are listed:
4. Select each projector you want to add by clicking its name
and clicking
You see this screen listing all registered projectors:
Note: To delete a projector from the list, highlight the
projector name, and click
5. Click
Close
projectors on the main EMP Monitor screen:
5/03
to locate projectors currently operating
Manual registration
. When you're done, click
Add
.
Delete
. You see the status of each of your registered
and enter
Click here
.
Close
페이지 인쇄