ABB AS400 사용자 설명서 - 페이지 12

{카테고리_이름} ABB AS400에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB AS400 14 페이지. Relay card

페이지 인쇄
ABB AS400 사용자 설명서
-----------------------------------------------------------------------------
Segment 1 Function
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
Please Enter Number:
The segments' default configuration is:
-
Segment 1: Utility Failure
-
Segment 2: Battery Low
-
Segment 3: General Alarm
-
Segment 4: Bypass Status
-
Segment 5: Summary Alarm
Functions description:
1. Utility Failure: UPS input mains voltage or frequency out of range
2. Battery Low: UPS Battery voltage level is low
3. General Alarm: UPS has a failure alarm
4. Bypass Status: UPS is in Bypass mode
5. Summary Alarm: When any of the following is active, the segment will be activated: "Utility Failure",
"General Alarm", "Bypass", "Battery Low", "Over Load Warning"
6. Battery Testing: Battery Test is in progress
7. Shutdown Processing: UPS executing shutdown after has received a shutdown command via
communication port
8. Overload Warning: UPS load is over the overload warning level defined in the specification of the UPS
9. UPS On: The UPS is powered on and is capable of providing power to the system (whether utility power is
available or not).
1.5.2.3 Input Segment Function Configure menu
The Input Segment Function menu supports the configuration and settings of the current status as indicated
in Figure 20.
--------------------------------------------------------
Input Segment Function Configure
--------------------------------------------------------
------------------------------------------------------
Please Enter Number:
The segments' default configuration is:
-
Segment 6: Battery Mode Shutdown (Configurable)
-
Segment 7: UPS On (Non-configurable)
-
Segment 8: UPS Off (Non-configurable)
1. Utility Failure
2. Battery Low
3. General Alarm
4. Bypass Status
5. Summary Alarm
6. Battery Testing
7. Shutdown Processing
8. Over Load Warning
9. UPS On
0. Exit
Figure 19: Output function select menu
1. Segment 6 function, Current
2. Segment 7 function, Current Setting(UPS On)
3. Segment 8 function, Current Setting(UPS Off)
0. Exit
Figure 20: Input Segment select menu
4NWP100446R0001_OPM_ABB_AS400RelayCardPowerValue_EN140226
Modifications reserved
(Battery Mode Shutdown)
Setting
Page 13/15 ABB