Toshiba 19A20 서비스 매뉴얼 - 페이지 17
{카테고리_이름} Toshiba 19A20에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba 19A20 28 페이지. Color television
Toshiba 19A20에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)
The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL s or t button.
First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
TV/CABLE function
1
Press POWER, to turn on the TV.
2
Press MENU (then s or t) repeatedly until "TV/CABLE" in
the Set up menu is displayed in purple.
3
Press ;(<) or :(>) until the mode that corresponds to your
TV signal system is displayed in purple.
CH PROGRAM function
1
Press MENU (then s or t) repeatedly until "CH PRO-
GRAM" in the Set up menu is displayed in purple.
2
Press ;(<) or :(>) to start channel programming.
The TV will automatically cycle through all the TV or CABLE
channels depending on the mode selected, and store
active channels in the channel memory.
3
When channel programming is complete, you will see the
message to the right.
4
Press CHANNEL s or t to make sure the channel pro-
gramming has been done properly.
PROGRAMMING CHANNEL MEMORY
– 17 –
ADD/ERASE function
After performing the CH PROGRAM function, you can add
or erase specific channels.
1
Select the channel you want to erase using the CHANNEL
s or t button, or select the channel you want to add using
the Channel Number buttons.
2
Press MENU (then s or t) repeatedly until "ADD/ERASE"
in the Set up menu is displayed in purple.
3
Press ;(<) or :(>) :
To erase the channel
Press the button until "Erase" is displayed in purple indicat-
ing that the channel has been erased from the memory.
To add the channel
Press the button until "ADD" is displayed in purple indicat-
ing that the channel has been memorized.
4
Repeat steps 1 to 3 for other channels.
You have now completed the channel programming.