Toshiba 20A46C 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Toshiba 20A46C에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba 20A46C 29 페이지. Toshiba 20a46c: user guide
Toshiba 20A46C에 대해서도 마찬가지입니다: 서비스 매뉴얼 (35 페이지)
페이지 인쇄
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature that allows the
TV to skip up or down to the next channel in the TV's memory,
skipping over unwanted channels.
Before selecting channels, you must program them into the TV's
memory. In addition to normal VHF and UHF channels, this TV
can receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When
shipped from the factory, this menu option is in the CABLE setting.
TV/CABLE SELECTION
1
Press MENU.
2
Press SET + or – until the indicator next to
"CH SETUP" begins to flash, then press
ENTER.
3
Press SET + or – until the indicator next
to "TV/CABLE" begins to flash.
4
Press ENTER to select the TV or CABLE
mode. The arrow indicates the selected
mode.
5
Repeatedly press MENU until the menu
screen closes.
NOTE:
Contact your cable company to determine the type of cable
system used in your area.
AUTOMATIC CHANNEL MEMORY
1
Press MENU.
2
Press SET + or – until the indicator next to
"CH SETUP" begins to flash, then press
ENTER.
3
Press SET + or – until the indicator next
to "AUTO CH MEMORY" begins to flash,
then press ENTER. The TV will begin
memorizing all the channels available in
your area. Channel numbers will remain
red until auto memorizing is complete.
4
Repeatedly press MENU
ADJUSTING THE PICTURE
You can adjust the settings for brightness, contrast, color,
tint and sharpness.
1
Press MENU.
2
Press SET + or – until the indicator next to "PICTURE"
begins to flash, then press ENTER.
3
ENTER to select the item you want to
Repeatedly press
adjust.
BRIGHTNESS
CONTRAST
3M91721A[En] P08-12
MENU
CH SETUP
PICTURE
LANGUAGE
LOCK
ON TIMER
+ / Ð / ENTER / MENU
〈
〉
TV
CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / – / ENTER / MENU 〉
MENU
CH SETUP
PICTURE
LANGUAGE
LOCK
ON TIMER
+ / Ð / ENTER / MENU
〈
〉
TV
CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / – / ENTER / MENU 〉
until the menu screen closes.
COLOR
TINT
SHARPNESS
9
TO ADD/DELETE CHANNELS
1
Press MENU.
2
Press SET + or – until the indicator next to
"CH SETUP" begins to flash, then press
ENTER.
3
Press SET + or – until the indicator
next to "ADD/DELETE" begins to
flash, then press ENTER.
4
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (0–9),
CH + or –, SET + or –.
5
Press ENTER to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press ENTER if you wish
to ADD the unmemorized channel. The channel indicator
will change from red to green when a channel is added
and the channel will be memorized.
If a memorized channel was selected (step 4), the
channel indication will be green. To delete the channel
from memory, press ENTER repeat-
edly until "DEL" appears on-screen.
The channel indicator will change
from green to red when a channel is
deleted. Repeat steps 4 and 5 for
each channel to be added or deleted.
6
Repeatedly press MENU
until the menu screen closes.
4
Press SET + or – to adjust the setting.
+
BRIGHTNESS
higher
CONTRAST
lighter
COLOR
deeper
TINT
greenish
SHARPNESS
sharper
TO RETURN TO THE FACTORY SETTINGS:
Press RESET while the picture adjusting mode is
on-screen.
22/12/05, 4:46 PM
MENU
CH SETUP
PICTURE
LANGUAGE
LOCK
ON TIMER
+ / Ð / ENTER / MENU
〈
〉
TV
CABLE
AUTO CH MEMORY
ADD / DELETE
〈 + / – / ENTER / MENU 〉
ADD
CH 012
〈 0 – 9 / + / – / ENTER / MENU 〉
–
lower
darker
paler
reddish
softer
9