Toshiba 22BL702B 소유자 매뉴얼 - 페이지 20

{카테고리_이름} Toshiba 22BL702B에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba 22BL702B 48 페이지. Digital series

페이지 인쇄

1. User Manual

Before switching on the television put your decoder and media recorder to Standby if they are connected

and ensure the aerial is connected to your television. To set up the television use the buttons on the remote

MPORTANT: Ensure that the aerial is connected and

a Common Interface module is not inserted before

switching on the TV for the ﬁ rst time installation.

Connect the mains plug and switch the TV to on

using the side control switch. If the TV does not

switch on, press any numbered or

the remote control, then the language selection

menu will be displayed. This screen will appear

the ﬁ rst time that the TV is switched on and each

time the TV is reset.

By pressing

Up or Down button, highlight the

language you want to set and press OK button.

The following message will be displayed next:

By pressing

Left or Right button, select the

country you want to set and press Down button

to highlight the Search Type option. Use Left or

Right to set the desired search type. Available

search types are Digital and analog, digital only

and analog only.

When set,

Down buton to select Teletext

Language. Use Left or Right button to select

desired Teletext Language.

Press

Down button after setting Teletext Language

option. Scan Encrypted will be then highlighted.

You can set Scan Encrypted as Yes if you want

to scan coded stations.

22BL702B_22BL704B_MB62_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10076309_10077187.indd 19

Initial Installation

control as detailed on page 13.

Press

and the following message will be displayed on

the screen:

button on

Select

and press OK button to continue.

The Auto tuning screen will appear and the

television will start to search for available stations.

The progress bar will move along the line. You

must allow the television to complete the search.

The following OSD will be displayed on the screen

and the television will search for the selected

broadcasts:

Note: You can press MENU button to cancel.

•

After the available stations are stored, Channel List

will be displayed on the screen. If you like the sort

channels, according to the LCN, please select Yes

and then press OK button (if available).

•

Press

OK button to quit channel list and watch TV.

Note: Do not turn off the TV while initializing ﬁ rst time

installation.

- 19 -

OK button on the remote control to continue

Yes button by using Left or Right button

18.05.2012 09:16:19