Toshiba 24 D28 Series 사용 설명서 - 페이지 11

{카테고리_이름} Toshiba 24 D28 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba 24 D28 Series 38 페이지.
Toshiba 24 D28 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지), 사용 설명서 (37 페이지), 사용 설명서 (45 페이지), 사용 설명서 (37 페이지), 사용 설명서 (37 페이지), 사용 설명서 (37 페이지)

페이지 인쇄

partition to be used for the USB Recording ready

features.

Some stream packets may not be recorded because

of signal problems, as a result sometimes videos may

freeze during playback.

Record, Play, Pause, Display (for playlist dialogue) keys

can not be used when teletext is on. If a recording starts

from timer when teletext is on, teletext is automatically

turned off. Also teletext usage is disabled when there

is an ongoing recording or playback.

Timeshift Recording

Press Pause button while watching a broadcast to

activate timeshifting mode. In timeshifting mode, the

programme is paused and simultaneously recorded to

the connected USB disk.

Press Play button again to resume the paused

programme from where you stopped. Press the Stop

button to stop timeshift recording and return to the

live broadcast.

Timeshift cannot be used while in radio mode.

You can use the timeshift rewind feature after resuming

normal playback or fast forward option.

Instant Recording

Press Record button to start recording an event

instantly while watching a programme. You can press

Record button on the remote control again to record

the next event after selecting the next programme from

within the electronic programme guide. Press Stop

button to cancel instant recording.

You can not switch broadcasts during the recording

mode. While recording a programme or during the

timeshifting, a warning message appears on the screen

if your USB device speed is not sufficient.

Watching Recorded Programmes

Select Recordings from the TV menu. Select a

recorded item from the list (if previously recorded).

Press the OK button to view the Options menu. Select

an option then press OK button.

Note: Viewing main menu and menu items will not be available

during the playback.

Press the Stop button to stop a playback and return

to the Recordings.

Slow Forward

If you press Pause button while watching recorded

programmes, the slow forward feature will be available.

You can use Fast Forward button to slow forward.

Pressing Fast Forward button consecutively will

change slow forwarding speed.

Recording Configuration

Select the Settings tab in the TV>Recordings menu

to configure the recording settings and press OK.

Format Disk: You can use the Format Disk option for

formatting the connected USB disk. Your PIN will be

required to use the Format Disk feature.

Note: Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have defined.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it's file system will be converted

to FAT32. In most cases operation errors will be fixed

after a format but you will lose ALL your data.

If "USB disk writing speed too slow to record"

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser

You can play back music and movie files and display

photo files stored on a USB storage device by

connecting it to your TV. Connect a USB storage device

to one of the USB inputs located on the side of the TV.

After connecting a USB storage device to your TV

Media Browser menu will be displayed on the screen.

You can access the content of the connected USB

device any time later from the Sources menu. Select

the related USB input option from this menu and press

OK. Then select the file of your choice and press OK

to display or play it back.

You can set your Media Browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen when pressed the Info button

while playing back a video file or displaying a picture

file. Press the Info button, highlight the gear wheel

symbol positioned on the right side of the information

bar and press OK. Picture Settings, Sound Settings,

Media Browser Settings and Options menus will be

available. The contents of these menus may change

according to the type of the currently open media file.

Only Sound

playing back audio files.

Start playback and activate

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

English - 10 -

Settings menu

will

Loop/Shuffle Mode Operation

All files in the list will be

continuously played in

original order

The same file will be

played continuously

(repeat)

All files in the list will be

played once in random

order

All files in the list will be

continuously played in

the same random order

be available while