Epson PowerLite 965 설치 핸드북 - 페이지 2
{카테고리_이름} Epson PowerLite 965에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 965 2 페이지. Warranty statement
Epson PowerLite 965에 대해서도 마찬가지입니다: 운영 매뉴얼 (48 페이지), 운영 매뉴얼 (47 페이지), 사양 시트 (6 페이지), 빠른 설정 (4 페이지), 적합성 선언 (4 페이지)
페이지 인쇄
Epson PowerLite 97 / 98 / 99W / 955W / 965
Power light
Status light
Off
Flashing blue
Off
Flashing blue
Flashing blue
Light status
varies
Off
Flashing blue
Off
Flashing blue
Off
Flashing blue
Off
Flashing blue
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Lamp light
Temp light
Off
Orange
Orange
Off
Flashing
Light status
orange
varies
Off
Flashing
orange
Flashing
Off
orange
Flashing
Flashing
orange
orange
Orange
Orange
INSTALLATION HANDBOOK
Lamp and Status Information
Status and solution
Projector has overheated and
turned off. Leave it turned off to
cool down. Once the Temp and
Status lights turn off and the power
light turns blue (after about five
minutes), try the suggestions
below:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.
Lamp has a problem.
• Check to see if the lamp is
burned out, broken, or installed
incorrectly. Reseat or replace the
lamp as necessary.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.
Replace the lamp soon to avoid
damage. Do not continue using the
projector.
A fan or sensor has a problem.
Turn the projector off, unplug it, and
contact Epson for help.
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Auto iris error. Turn the projector
off, unplug it, and contact Epson for
help.
Power error. Turn the projector off,
unplug it, and contact Epson for
help.
2