CROWN INDUSTRIAL Aut-o-doR 1265 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} CROWN INDUSTRIAL Aut-o-doR 1265에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CROWN INDUSTRIAL Aut-o-doR 1265 12 페이지. Slide door operators
페이지 인쇄INTRODUCTION
The Richards-Wilcox No. 1265 and 1266 Slide Door Electric Operators are supplied
factory prepared for site wiring. The purpose of this booklet is to provide wiring diagrams
and instructions for the most popular of the control systems. The booklet is to be used in
connection with the installation Manual (G-996) supplied with each operator.
GENERAL NOTES
Wiring diagrams have been prepared to illustrate conditions with the door in the fully
closed position. On the "Operator and Reversing Starter Wiring" pages 4 through 6 solid
lines have been used to denote factory wiring and dotted lines site wiring. On the
diagrams of "Control Wiring" pages
7
through 10, heavy weight lines have been used to
show site wiring and lighter weight lines to denote factory wiring. On the "control wiring"
diagrams, control circuit transformers have been shown. Control circuit transformers are
not provided with operators intended for use on 115 volt power supplies.where control
circuit power connections are to be made directly across the line. See general installa
tion instruction manual (G-996) for establishing proper direction of door travel.
WARNING
The operator is tested at the factory for a specified voltage and is marked as such. Check
to insure that your power source is the same as shown on the packing list from the
packing list envelope.
WARNING
BE SURE ALL POWER IS ALWAYS OFF WHILE WIRING OR SERVICING OPERA·
TOR. UPON APPLYING POWER, SOME ELECTRICALOPERATORCONTROLCIR·
CUlTS CAN CAUSE IMMEDIATE OPERATION. INSURE THAT THE PATH OF THE
DOOR IS FREE FROM OBSTRUCTIONS AND PERSONNEL BEFORE TURNING
POWER ON.
101,..,
LIMIT
------i.
SWITCN
G
LIMIT
" ' - CLOCKWISE /
ROTAn ON
MOTOR
SWITCH
BRAKE
COUNHR
~
CLOCKWISE /
ROTATION
RICHARDS-WILCOX MFG.
co.
AURORA, ILLINOIS
Page 3
G-997