Epson PowerLite Pro G6250 운영 매뉴얼 - 페이지 6

{카테고리_이름} Epson PowerLite Pro G6250에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite Pro G6250 48 페이지. Operation guide - easymp multi pc projection
Epson PowerLite Pro G6250에 대해서도 마찬가지입니다: 운영 매뉴얼 (47 페이지), 운영 매뉴얼 (49 페이지)

페이지 인쇄

Tasks that can be done using EasyMP Monitor

EasyMP Monitor lets you carry out operations such as checking the

status of multiple EPSON projectors that are connected to a network and

controlling the projectors from the computer.

Following are brief descriptions of the monitoring and control functions

that can be carried out using EasyMP Monitor.

• Registering projectors for monitoring and control

Projectors on the network can be searched for automatically, and you

can then select projectors to be registered from the projectors that are

detected.

You can enter the IP addresses for target projectors to register them.

• Registered projectors can also be assigned to groups so that they can

be monitored and controlled in groups.

• Monitoring the statuses of registered projectors

The power status (ON/OFF) for projectors and problems or warnings

requiring attention can be checked visually by means of icons.

You can select groups of projectors or a single projector that you are

interested in, and then check the cumulative lamp operating time or the

details of information such as input sources, problems, and warnings

for these projectors.

• Controlling registered projectors

Projectors can be selected in groups or as single projectors, and you can

then carry out operations for the selected projectors such as turning the

power on and off and switching their input sources.

Web control functions can be used to change the settings in the

projector's configuration menu.

If there are certain control actions which are carried out regularly at

particular times or on particular days, you can use Timer Settings to

• Mail notification function settings

You can set e-mail addresses to which notifications are sent if a status

requiring attention, such as a problem, occurs with a projector that has

been registered.

• Sending messages to registered projectors

You can send JPEG files to the registered projectors at once by using

Message Broadcasting, which is a plug-in software for EasyMP

Monitor.

To download the software and manual, visit www.epson.com, select

your location, and select your product.