Epson PowerLite Pro G6800 운영 매뉴얼 - 페이지 8

{카테고리_이름} Epson PowerLite Pro G6800에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite Pro G6800 47 페이지. 3lcd projector
Epson PowerLite Pro G6800에 대해서도 마찬가지입니다: 운영 매뉴얼 (48 페이지), 운영 매뉴얼 (49 페이지), 빠른 참조 (7 페이지), 설치 핸드북 (3 페이지)

페이지 인쇄

Installing EasyMP Network Updater

Download and install EasyMP Network Updater on your computer.

Note: You need administrator authority to install EasyMP Network Updater.

1. Download the latest version of EasyMP Network Updater from the

2. Double-click Setup.exe to start the installer.

3. Follow the on-screen instructions.

Parent topic:

Selecting Projector Network Settings

If the projector you want to update is not connected to your network, select the necessary settings to

connect it to your network. Connect the projector using a wired network system. Firmware cannot be

updated over a wireless LAN.

Setting Up a Projector to Connect in Advanced Connection Mode (Wired)

Parent topic:

Setting Up a Projector to Connect in Advanced Connection Mode (Wired)

To connect a projector to a wired LAN, you need to select network settings on the computer and the

projector.

1. Check that DHCP is available under the current network environment.

Note: If DHCP is not available, write down the following values that are available for your projector.

• IP Address

• Subnet Mask

• Gateway Address

2. Connect the computer to the network.

Note: To set up a network connection, see the documentation supplied with your computer or

network adapter.

3. Connect a LAN cable to the projector.

Installing the Application

Setting Up EasyMP Network Updater for the First Time

Epson

website.