Epson PowerLite S17 설치 핸드북

{카테고리_이름} Epson PowerLite S17에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite S17 4 페이지. Powerlite series
Epson PowerLite S17에 대해서도 마찬가지입니다: 운영 매뉴얼 (48 페이지), 적합성 선언 (4 페이지), 빠른 설정 (4 페이지)

페이지 인쇄

Epson PowerLite S17 / W17 / X17

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side

of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you

open the lamp cover.

4. Slide the lamp cover out and lift it off.

INSTALLATION HA NDBOOK

Maintenance