MSI 845PE-V2 Series 사용 설명서 - 페이지 18

{카테고리_이름} MSI 845PE-V2 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI 845PE-V2 Series 35 페이지. Msi 845pe-v2 motherboard: instruction manual

Frequency/Voltage Control

Current CPU Clock

It shows the current clock of CPU. Read-only.

Adjust Memory Frequency

When it is set to [Manual] in High Performance Mode, user can place an artificial memory clock limit on

the system. Please note that memory is prevented from running faster than this frequency. Setting

options: [PC100], [PC133], [Auto].

Auto Detect PCI Clk

This item is used to auto detect the PCI slots. When set to [Enabled], the system will remove (turn off)

clocks from empty PCI slots to minimize the electromagnetic interference (EMI). Settings: [Enabled],

[Disabled].

Spread Spectrum

When the motherboard's clock generator pulses, the extreme values (spikes) of the pulses creates EMI

(Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by

modulating the pulses so that the spikes of the pulses are reduced to flatter curves. If you do not have

any EMI problem, leave the setting at [Disabled] for optimal system stability and performance. But if you

are plagued by EMI, select the desired range for EMI reduction. Remember to disable Spread

Spectrum function if you are overclocking, because even a slight jitter can introduce a temporary boost

in clock speed which may just cause your overclocked processor to lock up.

CPU Clock

This item allows you to select the CPU Front Side Bus clock frequency (in MHz) and overclock the