Epson Stylus COLOR 3000 사용자 설명서 - 페이지 9

{카테고리_이름} Epson Stylus COLOR 3000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus COLOR 3000 43 페이지. Epson stylus color 3000: product information
Epson Stylus COLOR 3000에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 브로셔 및 사양 (24 페이지), 빠른 설정 매뉴얼 (21 페이지), 브로셔 및 사양 (2 페이지), 사양 (1 페이지), 매뉴얼 (13 페이지), 브로셔 및 사양 (4 페이지)

페이지 인쇄

Introduction

Standalone and Network

Environments

If your Macintosh is not connected to a network, you are using

it as a "standalone" system, with your EPSON Stylus printer

directly connected to your system. Before you install the

StylusRIP software, you must set up your printer and test it

fully; see Chapter 1 for complete instructions.

If your Macintosh is connected in a network, there are two ways

to use the StylusRIP software, depending on how your network

is configured.

Note:

It is best to choose a Power Macintosh with a fast processor and

ample RAM as your print server, allowing you to devote its

resources to printing the data sent over the network. LocalTalk

networks are not recommended for use with EPSON printers.

In a "direct connection" configuration (as shown below), the

Macintosh that is connected to the printer acts as the print server,

with the StylusRIP Server software installed on it. The other

computers in the network are "clients" of the server, with the

StylusRIP client software installed on them.

serial cable

print server

clients

printer