Epson Stylus COLOR 3000 빠른 설정 매뉴얼 - 페이지 10

{카테고리_이름} Epson Stylus COLOR 3000에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus COLOR 3000 21 페이지. Epson stylus color 3000: product information
Epson Stylus COLOR 3000에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 브로셔 및 사양 (24 페이지), 사용자 설명서 (43 페이지), 브로셔 및 사양 (2 페이지), 사양 (1 페이지), 매뉴얼 (13 페이지), 브로셔 및 사양 (4 페이지)

페이지 인쇄

Caution:

Before installing the card,

you must unplug the

printer from the power

outlet to avoid damaging

the printer and the card.

3. Do one of the following:

If you're using the included USB-to-parallel cable,

connect the other end of the cable to one of the USB

ports on your computer (Windows 98 and above, or

Macintosh).

If you're using a parallel cable (Windows only),

connect the other end of the cable to your computer's

parallel port and secure it as necessary.

After you connect the printer, you're ready to install the

software, as described on page 12.

Installing and Connecting to an Optional

Interface Card

To connect the printer to an optional FireWire or Ethernet

card, you first need to install the card in your printer. You also

need the appropriate cable.

1. Turn off your computer and your printer.

2. IMPORTANT: Unplug the printer from its electrical

outlet. Not doing so will cause damage to the printer and

the card.

3. Disconnect any interface cables from the printer.

4. Use a Phillips-head screwdriver to remove the two screws

securing the interface cover. Then lift off the cover.