Toshiba DIGITAL Series 사용자 설명서 - 페이지 14

{카테고리_이름} Toshiba DIGITAL Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba DIGITAL Series 45 페이지. Split type
Toshiba DIGITAL Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (48 페이지), 사용자 설명서 (49 페이지), 소유자 매뉴얼 (50 페이지), 사용자 설명서 (48 페이지), 소유자 매뉴얼 (4 페이지), 소유자 매뉴얼 (41 페이지), 소유자 매뉴얼 (22 페이지), 설치 참고 사항 (4 페이지)

Connecting External Equipment

Before connecting any external equipment, remove the mains plug from the wall socket.

Aerial cable:...........................................................

Connect the aerial to the ANT. socket on the rear of the

television.

SCART lead:..........................................................

If you use a decoder* or a media recorder, it is essential that

the scart cable is connected to the television.

Before running ﬁ rst time installation, any connected devices

need to be set to standby mode.

The SPDIF Coax. OUT socket enables the connection of a

suitable surround sound system.

Ethernet (LAN) Input is used for MHEG return channel (future

service, currently under development by broadcaster).

HDMI® (High-Deﬁ nition Multimedia Interface) is for using

with a DVD decoder or other equipment with digital audio and

video output. It is designed for best performance with 1080i

and 1080p high-deﬁ nition video signals but will also accept

and display VGA, 480i, 480p, 576i, 576p and 720p signals.

PC format signals will also be displayed.

32&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 14

NOTE: Although this television is able to connect to HDMI

equipment, it is possible that some equipment may not

operate correctly.

A wide variety of external equipment can be connected to the

television; therefore, the relevant owner's manuals for all addi-

tional equipment must be referred to for exact instructions.

If the television automatically switches over to monitor

external equipment, return to normal television by pressing

the desired programme position button. To recall external

equipment, press SOURCE button repeatedly to switch

between sources.

Important Notice: Side USB Input 1 is for service use only.

Note that this USB connector does not have any other func-

tions such as playing audio or picture ﬁ les.

Side USB input 2 is available in analogue TV mode. You

can use Media Browser screen to browse a connected

USB disk.

English - 14 -

03.10.2011 18:52:48