Toshiba DIGITAL Series 사용자 설명서 - 페이지 15

{카테고리_이름} Toshiba DIGITAL Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba DIGITAL Series 49 페이지. Split type
Toshiba DIGITAL Series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (48 페이지), 사용자 설명서 (45 페이지), 소유자 매뉴얼 (50 페이지), 사용자 설명서 (48 페이지), 소유자 매뉴얼 (4 페이지), 소유자 매뉴얼 (41 페이지), 소유자 매뉴얼 (22 페이지), 설치 참고 사항 (4 페이지)

페이지 인쇄

Connecting an HDMI® or DVI Device to the HDMI Input

The HDMI input on your TV receives digital audio and

uncompressed digital video from an HDMI source device

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

This input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) programme material in digital

form from EIA/CEA-861-D–compliant [1] consumer electronic

devices (such as a set-top box or DVD player with HDMI or

DVI output).

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV.

• Supported Audio format: Linear PCM, sampling rate

32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI ter-

minal. For proper operation, it is recommended that you use

an HDMI cable with the HDMI Logo (

• If your HDMI connection is capable of 1080p and/or

your TV is capable of refresh rates greater than 50Hz, you

will need a Category 2 cable. Conventional HDMI/DVI cable

may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• To view the HDMI device video, press SOURCE button to

select HDMI1 or HDMI2.

32BV501B_MB60_[GB]_(IB_INTERNET)_DVB-T_(3910uk)_10072937_10074859.indd 15

To Connect a DVI Device

Connect an HDMI-to-DVI adaptor cable (HDMI type A connec-

tor) to the HDMI input socket and audio cables to the SIDE AV

socket, using the supplied Side AV connection cable's RED

and WHITE inputs (see illustration).

• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

•

An HDMI-to-DVI adaptor cable transfers video only.

Separate analogue audio cables are required.

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

• When turning on your electronic components, turn on the

TV ﬁ rst, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device ﬁ rst, and then the TV.

- 15 -

03.10.2011 18:45:59