Toshiba E-Studio 190F 빠른 매뉴얼 - 페이지 36

{카테고리_이름} Toshiba E-Studio 190F에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba E-Studio 190F 40 페이지. Internet facsimile/email and network scan functions
Toshiba E-Studio 190F에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (16 페이지)

페이지 인쇄

When an anomaly occurs, the display may show one of the Information Codes listed below. These will help you to identify

and correct the problem.

Info.

Code

030

Document is misfeeding.

031

Document is too long or jammed.

Document length exceeds 39.4 inches (1 meter) in

"Normal" and "Fine" mode only. The length limitation

for "Super Fine" (600 dpi) mode, is subject to the

available Memory size.

600dpi

(Max. Length is 24 inches (600 mm))

061

ADF Cover (Document Return Guide) is open.

400

During initial connection, receiving station did not

respond or communication error occurred.

402

During initial connection, communication error

occurred.

403

No polling capability at the remote side.

404/405 During initial connection, communication error

occurred.

406

Transmission Password does not match.

Receiving Password does not match.

Received from an unauthorized station in Selective

Reception mode.

407

No confirmation from the receiving station for the

previous page sent.

408/409 Remote side confirms previous page(s) is(are)

illegible.

410

Communication aborted by the transmitting side.

411

Polling password does not match.

412

No data from the transmitting side.

414

Polling password does not match.

415

Polling transmission error.

416/417/

Received data has too many errors.

418/419

420/421 Machine goes to receiving mode, but receives no

command from the transmitting side.

422/427 Interface is incompatible.

430/434 Communication error occurred while receiving.

436/490 Received data has too many errors.

Problem Solving

Information Code

Meaning

Possible Action

1. Reload the document properly.

2. Remove the document jam.

3. Adjust ADF.

1. Reload the document properly.

2. Remove the document jam.

3. Add additional Flash Memory.

Close the ADF Cover.

1. Check with the other party.

2. Reload the document and send again.

Reload the document and send again.

Ask remote side to set "POLLED=ON".

Reload the document and send again.

Check the password or the telephone number

in One-Touch or Abbreviated station.

Wait a few minutes and send again.

Check with the other party.

Check the polling password.

Check with the other party.

Check the polling password.

Check with the other party.

1. Remote side misdial.

2. Check with the other party.

Check with the other party.

Page