Toshiba E-Studio 190F 빠른 매뉴얼 - 페이지 14
{카테고리_이름} Toshiba E-Studio 190F에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba E-Studio 190F 16 페이지. Internet facsimile/email and network scan functions
Toshiba E-Studio 190F에 대해서도 마찬가지입니다: 빠른 매뉴얼 (2 페이지), 빠른 매뉴얼 (40 페이지)
페이지 인쇄
Internet FAX Return Receipt Error Messages
Error messages that are printed on the Internet Fax Return Receipt when remote programming of the Auto
Dialer via email fails.
1
Format Error : <@command block, the
"@end" command is missing.>
2
Format Error: <@begin block, the "@begin"
command is missing.>
3
Format Error : <@begin block, the "@end"
command is missing.>
4
Format Error : <@system block, the
"@end" command is missing.>
5
Format Error : <@sender block, the
"@end" command is missing.>
6
Format Error:<@domain block, the "@end"
command is missing.>
7
Format Error : <@program block, the
"@end" command is missing.>
8
Format Error:<@system block, the
"@system" command is missing.>
9
Permission denied : <054 Fax Forward
parameter is set to "Valid".>
10
Permission denied : <Fax machine is busy
performing a task.>
11
Error : <Programmed ABBR overwrite
prohibited. Use open ABBR only.>
12
Permission denied : <Password is
incorrect.>
13
Permission denied : <158 PC Remote
Dialer Update parameter is set to
"Invalid".>
14
Format Error : <error line>
15
Warning : <error line>
16
Warning : Field limit exceeded<error line>
14
Problem Solving
Error Message
Error Message
Possible Cause / Action
The block termination command "@end" is missing in the
"@command" block, add the "@end" command and try again.
The block start command "@begin" is missing in the "@begin" block,
add the "@begin" command and try again.
The block termination command "@end" is missing in the "@begin"
block, add the "@end" command and try again.
The block termination command "@end" is missing in the "@system"
block, add the "@end" command and try again.
The block termination command "@end" is missing in the "@sender"
block, add the "@end" command and try again.
The block termination command "@end" is missing in the "@domain"
block, add the "@end" command and try again.
The block termination command "@end" is missing in the
"@program" block, add the "@end" command and try again.
The system block start command "@system" is missing in the
"@system" block, add the "@system" command and try again.
Set the Fax Forward parameter to "Invalid".
Try again later when the machine is not busy.
Cannot overwrite existing programmed data, use the "Delete"
command to erase the existing data first.
Correct the password and try again.
Set the PC Remote Update parameter to "Valid".
The format of the Entry is incorrect / incomplete or the data string for
each station is not defined within a single line.
The format of the Entry is incorrect or the number of characters
entered, exceed the maximum allowed in the field. Correct it and try
again.
The maximum number of Station Name, Domain Name, Sender
Name, Program Name, etc. were exceeded.