Toshiba e-STUDIO 3530c 안전 정보 매뉴얼 - 페이지 20

{카테고리_이름} Toshiba e-STUDIO 3530c에 대한 안전 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba e-STUDIO 3530c 34 페이지. Multifunctional digital systems

페이지 인쇄

1 GENERAL PRECAUTIONS

General Precautions

When installing or moving

e-STUDIO5520C/6520C/6530C

For U.S.A. and Canada

This Multifunctional Digital Systems requires 115 V, 20 A (or 15 A + 20 A), 50/60 Hz electric power.

For EU

This Multifunctional Digital Systems requires 220 to 240 V AC, 13 A, 50/60 Hz electric power.

Except U.S.A., Canada and EU

This Multifunctional Digital Systems requires 220 to 240 V AC, 10 A, 50/60 Hz electric power. For Saudi Arabia 100 V

version, it requires 127 V AC, 20 A (or 15 A + 20 A), 50/60 Hz electric power.

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

For U.S.A. and Canada

This Multifunctional Digital Systems requires 115 V, 15 A, 50/60 Hz electric power.

For EU

This Multifunctional Digital Systems requires 220 to 240 V AC, 10 A, 50/60 Hz electric power.

Except U.S.A., Canada and EU

This Multifunctional Digital Systems requires 220 to 240 V AC, 10 A, 50/60 Hz electric power. For Saudi Arabia 100 V

version, it requires 127 V AC, 15 A, 50/60 Hz electric power.

e-STUDIO205L/255/305/355/455

For U.S.A. and Canada

This Multifunctional Digital Systems requires 115 V, 12 A, 50/60 Hz electric power.

For EU

This Multifunctional Digital Systems requires 220 to 240 V AC, 8 A, 50/60 Hz electric power.

Except U.S.A., Canada and EU

This Multifunctional Digital Systems requires 220 to 240 V AC, 8 A, 50/60 Hz electric power. For Saudi Arabia 100 V

version, it requires 127 V AC, 12 A, 50/60 Hz electric power.

e-STUDIO555/655/755/855

For U.S.A. and Canada

This Multifunctional Digital Systems requires 115 V, 20 A, 50/60 Hz electric power.

For EU

This Multifunctional Digital Systems requires 220 to 240 V AC, 9 A, 50/60 Hz electric power.

Except U.S.A., Canada and EU

This Multifunctional Digital Systems requires 220 to 240 V AC, 9 A, 50/60 Hz electric power. For Saudi Arabia 100 V

version, it requires 127 V AC, 20 A, 50/60 Hz electric power.

Do not use a power supply with a voltage other than that specified.

Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If you are

considering increasing the number of outlets, contact an electrician.

Always connect this Multifunctional Digital Systems to an outlet with a ground connection to avoid the danger of fire or

electric shock in case of short-circuiting. Contact your service representative for the details. Be sure to use a 3-

conductor, grounded wall outlet.

In areas, except U.S. and Canada, where a 2-pin plug is used, the Multifunctional Digital Systems must be grounded

for safety. Never ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.

Plug the power cord securely into the outlet. If it is not plugged in properly, it could heat up and cause a fire or give you

an electric shock.

Do not damage, break or attempt to repair the power cord.

The following things should not be done to the power cord.

- Twisting it

- Bending it

- Pulling it

- Placing anything on it

- Making it hot

- Situating it near radiators or other heat sources

This could cause a fire or give you an electric shock. If the power cord is damaged, contact your service

representative.

Do not install the equipment by yourself or try to move it once it has been installed. This could result in an injury or

damage to the device. Contact your service representative if the equipment needs to be installed or moved.

The socket outlet shall be near the equipment and be easily accessible.

Pull out the plug from the outlet more than once a year to clean around the prongs. Accumulating dust and dirt could

cause a fire due to the heat released by electric leakage.

General Precautions