Toshiba E-Studio 5506AC 종이 준비 매뉴얼 - 페이지 26

{카테고리_이름} Toshiba E-Studio 5506AC에 대한 종이 준비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba E-Studio 5506AC 46 페이지.

1.LOADING PAPER
3
Hold the knob and align the side guides to the length of the envelope.
Check that there is no gap between the paper and the side guides.
4
If the gap is too wide, it could cause paper misfeeding, or the paper size could not be correctly detected.
Between the paper and side guides ("A" in the figure):
Make sure there is no gap. (0.5 mm (0.02") or less on one side, 1.0 mm (0.04") or less in total) However, if paper
misfeeding occurs, make a gap.
5
Select the bypass tray during the operation for copying or printing and specify the paper size and
thickness.
For details for the operation for copying or printing, refer to the Copying Guide or Printing Guide.
26 Loading Paper on the Bypass Tray
A
A