Toshiba e-Studio 60F 사용자 설명서 - 페이지 18

{카테고리_이름} Toshiba e-Studio 60F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba e-Studio 60F 32 페이지. Toshiba all in one printer user manual

Scan to PC

You can use the e-STUDIO60F to scan documents and

edit the document with a PC (see Installation / PC con-

nection).

There are two ways to scan a document: You can place

it onto the scanner glass (flatbed scanner) directly or

load it into the automatic document feeder.

Flatbed scanner

1 Open the flatbed scanner cover. Please make sure

that the scanner glass is clean before placing the

original.

2 Place the document face down onto the glass.

3 Align it with back left corner of the scanner (marked

with arrows).

If you want to scan small three-dimensional objects

(such as coins or flowers), use transparent film to pro-

tect the scanner glass.

Automatic feeder

Place the document face up into the document feeder

(up to 10 pages on 60–90 g/m² paper).

If you are working with originals of an odd size or pho-

tos, please use the flatbed scanner.

A5 size documents should be inserted landscape.

The following points are the most common caus-

es of problems when inserting documents into the

feeder. Do not insert ...

• pages that are smaller than A5.

• pages from newspapers (printer's ink).

• stapled pages or pages with paper clips.

• creased or torn pages.

• wet pages or pages with corrections made with

correction fluid; dirty pages or pages with a

glossy or laminated surface.

• pages joined with sticky tape or glue, with adhe-

sive stickers such as "post-it

which are too thin or too thick.

Press Z to open the scan window on the PC.

To edit the scanned document, open a graphic ap-

plication and choose the scan function. Choose the

e-STUDIO60F TWAIN driver to start scanning.

" notes, or pages