Toshiba E-Studio 6508AC 종이 준비 매뉴얼 - 페이지 15

{카테고리_이름} Toshiba E-Studio 6508AC에 대한 종이 준비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba E-Studio 6508AC 46 페이지.

1.LOADING PAPER

 Large Capacity Feeder

Pull out the drawer of the Large Capacity Feeder carefully until it comes to a stop.

Do not touch the slide rail ("A" in the figure on the right).

This could injure you.

Place paper in the drawer.

Fan and jog the paper well before placing it. With its copied side facing up, place paper on the tray to avoid

making space between paper and the guide plate on the rear side.

 Do not exceed the upper limit at the guide plate on the rear side. For maximum number of sheets to be loaded,

refer to the Specifications Guide.

 If paper cannot be fed, printing takes a long time after feeding or the quality is poor, turn over the paper and

place it again.

 Place paper to avoid making space between paper and the guide plate on the rear side. If there is a gap, scans

may be printed on tilt.

Push the drawer of the Large Capacity Feeder straight into this equipment carefully.

When the drawer is completely inserted, the tray will move up to the paper feeding position.

Be careful not to let your fingers be caught when pushing the drawer into this equipment.

This could injure you.

Change the paper type as required.

 P.18 "Setting paper type"

Loading Paper in Drawers 15