Toshiba E-Studio 6508AC 종이 준비 매뉴얼 - 페이지 32
{카테고리_이름} Toshiba E-Studio 6508AC에 대한 종이 준비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba E-Studio 6508AC 46 페이지.
페이지 인쇄Precautions for Originals
0.
Acceptable originals
When the ADF (DSDF) is used, 2-sided originals can be automatically scanned one sheet after another. When the
original glass is used, originals such as OHP films, tracing paper, booklet or 3-dimensional objects, that cannot be
placed on the ADF can be scanned, as well as plain paper.
Location
Original glass
Length: 297 mm (11.69")
Width: 432 mm (17.01")
ADF (DSDF)
*
For the originals whose paper weight is more than 157 g/m2 (41.8 lb.), enough image quality may not be able to be obtained.
Automatic size detection does not work properly when A/B format originals are used in equipment for North
America. It does not work properly when LT format originals are used in equipment other than that for North
America.
In some models, automatic size detection does not work properly when K format paper is used for printing. (K
format is a standard paper size in China.)
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Be sure to place ST-size or A5-size originals in a landscape direction when using the ADF.
A maximum of 1000 sheets can be scanned per 1 copy job or up until the embedded memory becomes full.
There are precautions in addition to the ones above regarding originals to be faxed. For details, refer to the GD-1370
Fax Guide.
32 Precautions for Originals
Maximum size
1-sided originals: 35 – 209 g/m
(9.3 - 41.8 lb.)*
2-sided originals: 50 – 209 g/m
(13.3 - 41.8 lb.)*
Acceptable sizes for automatic size
Paper weight
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R, 8K, 16K,
—
16K-R
North America: LD, LG, LT, LT-R, ST-R
2
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R, FOLIO
2
North America: LD, LG, LT, LT-R,
ST-R, COMP
detection