Philips Signage BDL5560EL 사용자 설명서 - 페이지 31
{카테고리_이름} Philips Signage BDL5560EL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips Signage BDL5560EL 44 페이지. V2.00
Philips Signage BDL5560EL에 대해서도 마찬가지입니다: 사용자 설명서 (45 페이지)
페이지 인쇄
BDL5560EL
Advanced
Access advanced settings such as gamma, tint, video contrast and so on.
• {Gamma}: Adjust the non-linear setting for picture luminance
and contrast.
• {Tint}: Change the colour balance.
• {Custom tint}: Customise colour balance setting. Only available
if {Tint} {Custom} is chosen.
• {Video contrast}: Adjust video contrast.
• {Brightness}: Adjust screen brightness.
• {Hue}: Adjust screen hue.
Game or computer
When viewing content from a connected game console, choose {Game}
to apply game settings. When a computer is connected through HDMI,
choose {Computer}.
Make sure that {Format and edges} {Picture format} {Unscaled}
is selected so as to view maximum detail.
Format and edges
• {Picture format}: Change the picture format.
See page 16 for the descriptions about
16 for the descriptions about
5.2.2. Sound
Picture
Sound style
Restore style
Sound
Tiling
Bass
General settings
Treble
Balance
Surround mode
Audio out
Advanced
Sound style
Access predefined sound settings.
Restore style
Restore the last-selected predefined sound setting.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Balance
Adjust to emphasize left or right audio output balance.
Surround mode
Enhance your audio experience.
Audio out
Adjust audio output volume.
Picture format
.
Advanced
Access advanced settings to enhance your audio experience.
• {Auto volume leveling}: Enable the reduction of sudden volume
changes.
• {Speaker settings}: Turn on or off the internal speakers.
• {Clear sound}: Enhance sound quality.
• {Audio out format}: Choose the type of audio output through
the digital audio output connector. (HDMI only)
• {Audio out delay}: Automatically sync the image on this display
to the audio from a connected home theatre.
• {Audio out offset}: Adjust the setting for audio output delay.
Available if {Audio out delay} is switched on.
5.2.3. Tiling
Picture
Sound
Tiling
General settings
With this function you can create a single large-screen matrix (video
wall) that consists of up to 100 sets of this display (up to 10-sets on the
vertical and 10-sets on the horizontal sides).
Enable
Choose to {On} or {Off} the Tiling function. If {On}, the display will
apply the settings in {H monitors}, {V monitors}, {Position}, and
{Frame comp.}.
H monitors
Adjust displays on the horizontal side.
V monitors
Adjust displays on the vertical side.
Position
Adjust the position of this display in the screen matrix.
Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
1
3
22
Enable
H monitors
V monitors
Position
Frame comp.
H monitors
2
4
Position