Philips Signage Solutions BDL4220QL 사용자 설명서 - 페이지 10
{카테고리_이름} Philips Signage Solutions BDL4220QL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips Signage Solutions BDL4220QL 30 페이지. Signage solutions q-line display 42" edge led backlight full hd
Philips Signage Solutions BDL4220QL에 대해서도 마찬가지입니다: 빠른 매뉴얼 (3 페이지), 브로셔 및 사양 (3 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
BDL4620QL
1.4.
Mounting on a Wall
To mount this display to a wall, you will have to obtain a standard wall-mounting kit. We recommend using a mounting interface that complies with
UL1678 standard in North America.
400
1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the
screen face.
2. Ensure you have all accessories for mounting this display.
3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment
or injury to the user or installer. Product warranty does not cover damage caused by improper installation.
4. For the wall-mounting kit, use M6 mounting screws (20 mm long plus the thickness of the mounting bracket) and tighten them securely.
Caution:
To prevent the display from falling:
•
To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure to consult the
bracket manufacturer for installation location.
Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.
100 mm
100 mm
100 mm
NOTE:
When installing the display on a wall, please consult a professional technician for proper installation. We accept no liability for installations not
performed by a professional technician.
Table
100 mm
400
2
Protective Sheet