Philips Signage Solutions BDL4254ET 사용자 설명서 - 페이지 13
{카테고리_이름} Philips Signage Solutions BDL4254ET에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips Signage Solutions BDL4254ET 39 페이지. 42" edge led backlight full hd optical imaging, 5 touchpoints multi-touch display
Philips Signage Solutions BDL4254ET에 대해서도 마찬가지입니다: 사양 (3 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
BDL4254ET
2.
Parts and Functions
2.1.
Control Panel
9
[POWER] button
1
Press to turn the display on or put the display to standby.
[
MUTE] button
2
Press to switch the audio mute ON/OFF.
[
INPUT] button
3
Press to select the input source.
[ ] button
4
Press to increase the adjustment while OSD menu is on, or increase
the audio output level while OSD menu is off.
• Used as [SET] button in the On-Screen-Display menu,
[ ] button
5
Press to decrease the adjustment while OSD menu is on, or
decrease the audio output level while OSD menu is off.
[ ] button
6
Press to move the highlight bar up to adjust the selected item while
OSD menu is on.
[ ] button
7
Press to move the highlight bar down to adjust the selected item
while OSD menu is on.
[
MENU] button
8
Press to return to previous menu while OSD menu is on, or to
activate the OSD menu when OSD menu is off.
MUTE
INPUT
6
1
2
3
4
5
7
MENU
8
NOTE:
"Keyboard Control Lock Mode" This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both [ ]
and [ ] buttons and hold down continuously for more than
3 (three) seconds.
Remote control sensor and power status indicator
9
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
• Indicates the operating status of the display with OPS:
- Lights green when the display is on, but the OPS is off
- Lights blue when the display and the OPS is on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
4