Philips Signage Solutions BDL4271VL 사용자 설명서 - 페이지 28
{카테고리_이름} Philips Signage Solutions BDL4271VL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips Signage Solutions BDL4271VL 39 페이지. V-line display 42" full hd, 700cd/m2
Philips Signage Solutions BDL4271VL에 대해서도 마찬가지입니다: 사용자 설명서 (43 페이지), 브로셔 및 사양 (3 페이지)
페이지 인쇄
BDL5551EL
•
IP address
•
Subnet mask
•
Default gateway
•
Login user name (The default user name is {admin})
•
Login password (The default password is {0000})
Configuration reset
Reset all settings in Configuration1 menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP},
{Configuration1}, {Configuration2}, and {Advanced option} to the
factory preset values.
Press [ ] or [ ] button to select [Reset], and then press [SET] button
to do the reset.
Factory reset
Cancel
4.2.6. Configuration2 menu
OSD turn off
Picture
Information OSD
Screen
Off timer
OSD H-position
Audio
OSD V-position
PIP
Monitor information
Configuration1
Configuration2
Advanced option
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {5 ~ 120} seconds.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when input
signal is changed.
The information OSD will remain on the screen with {Off} selection.
The options are: {1 ~ 60} seconds.
Off Timer
Set the display to turn itself off to standby mode within an amount of
time specified.
The options are: {Off, 1 ~ 24} hours from currrent time.
NOTE:
When the "Off timer" is activated, the "Schedule" settings will
be disabled.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
Reset
20
Monitor information
Shows information about your display, including model number, serial
number, operating hours and software version.
Monitor information
Model name:
Serial no:
Operation hours:
SW Version:
4.2.7. Advanced option menu
Input resolution
Picture
HDMI clock threshold
Screen
Black level expansion
Gamma selection
Audio
Scan mode
PIP
Scan conversion
Film mode
Configuration1
IR control
Configuration2
Keyboard control
Tiling
Advanced option
Heat status
Input resolution
Set the resolution of the VGA input. This is only required when the
display is unable to detect the VGA input resolution correctly.
NOTE:
This item is functional for VGA input only.
The options are:
•
{1024x768 / 1280x768 / 1360x768 / 1366x768}
{1400x1050 / 1680x1050}
•
•
{1600x1200 / 1920x1200}
•
{Auto}: Determines the resolution automatically.
The selected settings will become effective after turning off the power
and turning it on again.
HDMI clock threshold
Adjust HDMI link clock.
• {Min} - 800KHz.(Default)
• {Max} - 5000KHz.
Black level expansion
This feature offers deeper blacks for an even better image quality.
The options are: {Off} / {Low} / {Medium} / {High}.
NOTE:
This item is functional for Video mode input only.
Gamma selection
Gamma is what controls the overall brightness of an image. Images
which are not corrected properly can appear too white or too dark, so
controlling the gamma properly can have a huge influence on the overall
picture quality of your display.
The options are: {Native} / {2.2} / {2.4} / {S gamma}.
Scan mode
Change the display area of the image.
BDL5551EL
0 H
3M
VER 0.204