Philips Signage Solutions BDL4677XL 사용자 설명서 - 페이지 6

{카테고리_이름} Philips Signage Solutions BDL4677XL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips Signage Solutions BDL4677XL 41 페이지. Videowall display 46" direct led bscklight, full hd
Philips Signage Solutions BDL4677XL에 대해서도 마찬가지입니다: 사양 (3 페이지)

페이지 인쇄

BDL4677XL

Information for U.K. only

(B)

WARNING - THIS APPLIANCE MUST BE EARTHED.

Important:

This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug

(A)

proceed as follows:

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin

plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse

at the distribution board should not be greater than 5A.

NOTE: T he severed plug must be destroyed to avoid a possible shock hazard should it be inserted

into a 13A socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance with the following code:

BLUE - "NEUTRAL" ("N")

BROWN - "LIVE" ("L")

GREEN & YELLOW - "EARTH" ("E")

1. The GREEN & YELLOW wire must be connected to the terminal in the plug which is marked with

the letter "E" or by the Earth symbol or coloured GREEN or GREEN & YELLOW.

2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured

BLACK.

3. The BROWN wire must be connected to the terminal which marked with the letter "L" or

coloured RED.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead

- not simply over the three wires.