Epson Stylus Pro 9600 Photographic Dye Ink 수동 업데이트 - 페이지 4

{카테고리_이름} Epson Stylus Pro 9600 Photographic Dye Ink에 대한 수동 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Pro 9600 Photographic Dye Ink 4 페이지. Large format digital colour printing
Epson Stylus Pro 9600 Photographic Dye Ink에 대해서도 마찬가지입니다: 브로셔 및 사양 (24 페이지), 포장 풀기 및 설정 매뉴얼 (24 페이지), 정보 매뉴얼 (16 페이지), 부품 목록 (21 페이지), 빠른 설치 매뉴얼 (34 페이지), 제품 정보 (15 페이지), 빠른 참조 매뉴얼 (11 페이지), 브로셔 및 사양 (8 페이지), 브로셔 및 사양 (6 페이지), 브로셔 및 사양 (16 페이지), 제품 참조 매뉴얼 (28 페이지), 사양 (4 페이지)

6. Slide the interface card along the slots on both sides of the interface compartment. Push it in firmly to fully

insert the connector at the rear of the interface card into the printer's internal socket.

7. Secure the interface card in the slot with the two screws included with the interface card.

8. Connect a compatible interface cable to the interface card and to your computer. If the cable has a ground

wire, secure it with one of the screws.

When connecting your printer and computer with the IEEE1394 interface board, attach the ferrite core

that is packed with your printer to the cable as shown.

Also, if you are using more than one computer, reconnect the other interface cable.

9. Make sure the printer is turned off. Then plug in the power cord.

To remove an interface card, follow the above steps in reverse order.

Reference Guide

The product code for the Photo Black ink cartridge is wrong. The correct product code is T5431.

The product code for the Auto Take-Up Reel Unit is wrong. The correct product code is C12C815251.

The units for Paper Feed Adjustment are 0.01%.

Roll Feed Spindle 2 inch (High tension / for Stylus Pro 7600) and Roll Feed Spindle 3 inch (High tension

/ for Stylus Pro 7600) cannot be used with the Stylus Pro 7600. The only high-tension spindle that can be

used with Stylus Pro 7600 is the 2/3 inch Dual Roll Feed Spindle, C12C811155.

Printed in Japan xx.xx-xx