Philips X Line 55BDL4005X 사용자 설명서 - 페이지 2
{카테고리_이름} Philips X Line 55BDL4005X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips X Line 55BDL4005X 49 페이지.
Philips X Line 55BDL4005X에 대해서도 마찬가지입니다: 사용자 설명서 (49 페이지)
페이지 인쇄
55BDL4005X/55BDL4007X
Safety Instructions
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may
result in exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your display:
Operation:
•
Keep the display out of direct sunlight and away from stoves or any other heat sources.
•
Keep the display away from oil, otherwise the plastic cover may be damaged.
•
It is recommended to set the display up in the well-ventilated place.
•
Ultra-violet ray filter is necessary of outdoor operation.
•
If the product will be used in extreme conditions such as high temperature, humidity, display patterns or operation time
etc... It is strongly recommended to contact Philips for Application engineering advice. Otherwise, its reliability and function
may not be guaranteed. Extreme conditions are commonly found at Airports, Transit Stations, Banks, Stock market, and
Controlling systems.
•
Remove any object that could fall into ventilation holes or prevent proper cooling of the display's electronics.
•
Do not block the ventilation holes on the cabinet.
•
When positioning the display, make sure the power plug and outlet are easily accessible.
•
When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal
operation.
•
Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your
local service center.
•
Do not subject the display to severe vibration or high impact conditions during operation.
•
Do not knock or drop the display during operation or transportation.
•
The eye bolt is for usage in short-time maintenance and installation. We suggest not to use the eye bolt for more than 1 hour.
Prolong usage is prohibited. Please keep a clear safety area under the display while using the eye bolt.
Maintenance:
•
To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your display,
grasp the frame to lift; do not lift the display by placing your hand or fingers on the LCD panel.
•
Unplug the display if you are not going to use it for an extensive period of time.
•
Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the
power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.
•
To avoid the risk of shock or permanent damage to the set, do not expose the display to dust, rain, water or an excessively
moist environment.
•
If your display becomes wet, wipe it with dry cloth as soon as possible.
•
If a foreign substance or water gets in your display, turn the power off immediately and disconnect the power cord. Then
remove the foreign substance or water, and send the unit to the maintenance center.
•
Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold.
•
In order to maintain the best performance of your display and ensure a longer lifetime, we strongly recommend using the
display in a location that falls within the following temperature and humidity ranges.
Environmental absolute ratings
Item
Storage temperature
Operation temperature
Glass Suraface temperature
(Operation)
Storage humidity
Operating humidity
•
LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.
Min.
Max.
Unit
-20
65
°C
0
40
°C
0
65
°C
5
90
% RH
20
80
% RH
ii